- #Conference call headset install
- #Conference call headset Pc
To exit UniBase mode, press the mode button of the device you first used to start the conference call with.You can now conference a softphone call with the existing phone call.After about 4 seconds, the LED lights for both phone and computer mode will light up.
#Conference call headset Pc
Press and hold the PC button on the base.To activate UniBase mode, start with the base in phone mode with a call on the line.Your headset is equipped with UniBase technology that allows you to conference calls your office phone and softphone calls together. You may also need to click your softphone’s disconnect button to end the call.The base’s Online Indicator will turn off After finishing your call, press the ON/OFF button to disconnect.Press the headset’s ON/OFF button and the base’s Online Indicator will light up.Ensure that the PC button on the top of the headset base is selected.If you do not have an EHS cable or a handset lifter, you will need to manually disconnect the line on your phoneģ.3 Making an outgoing call in USB/PC mode To end the call, place the headset on the base or press the ON/OFF button.The base’s Online Indicator LED will light up If there is an incoming call and the headset base is connected to a handset lifter or electronic hookswitch device, the TEL light and headset light will flash, and a ring tone will be heard on the headset.Otherwise, just hang up the phone manuallyģ.2 Receiving an incoming call in telephone mode After finishing the call, press the headset ON/OFF button to end the call if you have a handset lifter or EHS cable.Otherwise, you will need to lift the handset of your telephone or activate the headset button on your telephone If a handset lifter or electronic hookswitch device is connected to the headset base, the line will be engaged automatically.The base’s 3rd indicator light will light up
Ensure that the TEL button on top of the headset base is selected. Operation 3.1 Making an outgoing call in telephone mode To replace the ear pad, match the notches at the top, then click the bottom in place 3. To remove the ear pad of your LH270 or LH275 headset, put your thumb underneath the pad and pull up from the bottom. You may also need to select ‘disable’ on all other devices* If your computer doesn’t recognize the device, go to your computer’s Sound settings and select ‘DECT Headset’ as your default Playback/Recording device. Wait a few seconds before using the headset #Conference call headset install
Your computer may automatically recognize the device and install the correct drivers. Connect the included USB cable to the USB connector port on the back of the headset base and the other end to an available USB port on your computer. With the handset lifter or EHS cable connected, you will be able to answer and end calls using the ON/OFF button located on the headset - up to 350 feet away from your desk 2.5 Connecting to your computer’s USB port Refer to the user guide for the EHS cable for the correct setting of the Accessory selection switch. Connect the EHS cable to the AUX and TEL ports on the back of the headset base. Connect the EHS cable to your telephone as shown in its user guide. Want to see the setup video? Go to /LifterSetupĢ.4 Connecting a Leitner Electronic Hookswitch (EHS) Cable (optional). Ensure that the accessory selection switch on the bottom of your base is set to RHL. Connect the handset lifter to the AUX port located on the back of the headset base. Attach the handset lifter to your telephone as shown in its user guide. 
Follow instructions in section 2.2 before moving onto next step.The most common setting is 1*Ģ.3 Connecting with a Leitner Handset Lifter (optional)
You may need to adjust the compatibility switch located on the bottom of the base to find the correct setting for your phone model. Using the included connector cord, connect the TEL port on the back of headset base to the handset jack on your desk phone. Connect the other end of the curly cord to the handset jack on the headset base. Unplug the curly cord of your handset from your office phone. Most other phones use 1*Ģ.2 Connecting to a telephone without a headset jack Using the included connector cord, connect the TEL port on the back of the headset base to the headset port on your desk phone. NOTE: We recommend charging your headset for at least 4 hours before the first use 2.1 Connecting to a telephone with a headset jack The online indicator light on your base will light up Take out the included power adaptor and plug into the base unit.
0 kommentar(er)
